| |
Product Name |
Price |
 |
FlexRay EVB
The FlexRay Evaluation Board (EVB) enables quick setup and monitoring of a complete FlexRay network. This USB powered board includes two complete FlexRay nodes, each with channel A and B physical layers. |
$750.00 |
 |
neoECU-20
neoECU-20 is a rapid prototyping tool for CAN and LIN ECUs. neoECU 20 can be setup to control and measure automotive signals in minutes. ECU logic is defined in function block modeling scripts, allowing you to arrive at a workable ECU early in design. Now you have the ability to test your ECU models and accurately create simulation environments without C Code. |
$695.00 |
 |
neoRADI/O
Simple, Low Cost CAN I/O: For many lab applications, you want to expand the capability of your CAN tools to include physical I/O. The neoRADI/O device from Intrepid works with any CAN tool to provide low cost physical I/O. |
$350.00 |
 |
neoVI Blue
Intrepid Control Systems introduces neoVI, the new vehicle interface for your PC that fits in your pocket. The neoVI vehicle to PC interface is designed to be easy to install and use. Receiving and transmitting data on your network is hassle free. |
$1,995.00 |
 |
neoVI FIRE
Thousands Sold! neoVI FIRE provides six channels of CAN and four channels of LIN in one tool. All channels run simultaneously and are time stamped in hardware. A fully isolated USB interface allows a PC to send and receive messages without worry of damage to the PC. |
$1,995.00 |
 |
neoVI MOTE
neoVI MOTE is a scriptable CAN node with 4 buttons and audible feedback. Specially designed for in-vehicle applications, it easily mounts to the dashboard and has a sunlight readable display. |
$495.00 |
 |
neoVI Red
neoVI RED is a PC interface for multiple CAN and LIN channels. In addition, it comes with stand-alone datalogging, simulation, and ECU flashing capability. neoVI RED is a low cost, high value CAN and LIN bus interface that fits in your pocket. |
$1,195.00 |
 |
neoVI Yellow
Intrepid Control Systems introduces the neoVI YELLOW. The neoVI YELLOW fills the need for multiple CAN channels and J1708 support. It is a low cost, high value CAN and J1708 bus interface that fits in your pocket. Unlike most competing products, the neoVI-YELLOW is fully isolated from the PC and supports 100% network bus load. |
$1,195.00 |
 |
ValueCAN3 (DW 2 Channel)
ValueCAN3 delivers value by being a simple, low cost, high performance, and high quality tool for connecting your PC to a Controller Area Network (CAN) bus. It has become a low cost standard for many large corporations including automotive, military, industrial networking, and heavy commercial vehicle OEMs and their suppliers. ValueCAN3 has proven itself in a wide range of applications and environments. |
$395.00 |
 |
VCAN3 J1939-RP1210 Kit
This kit combines our low-cost dual-wire ValueCAN (Two Channels of CAN) tool and the Heavy Duty Cable for connecting to the CAN/J1939 network on commercial vehicles. The ValueCAN's driver set includes a RP1210B DLL for use with RP1210 compliant software applications. |
$455.00 |
| |
VCAN3-LIMITED-J1939-RP1210 Kit
This kit combines our low-cost dual-wire ValueCAN (Single Channel of CAN) tool and the Heavy Duty Cable for connecting to the CAN/J1939 network on commercial vehicles. The ValueCAN's driver set includes a RP1210B DLL for use with RP1210 compliant software applications. |
$355.00 |
 |
Vehicle Network Tester (IVNT-02)
The Vehicle Network Tester (IVNT-02) allows users to connect test low-level physical layer capabilities of onboard controllers connecting to Controller Area Network (CAN). The IVNT supports low-level, physical layer validation on up to two dual wire CAN networks as well as supporting connection for data monitoring/transmitting on two additional dual wire CAN busses, one single wire CAN bus, one LSFT CAN bus, and up to four local interconnect networks (LIN). |
$6,995.00 |
 |
Vehicle Spy (Maintenance 1)
Keep your Vehicle Spy version up-to-date by extending your upgrade period for an additional year. Price applicable if purchased within the first three months of the upgrade expiration. |
$479.00 |
 |
Vehicle Spy (Maintenance 2)
Keep your Vehicle Spy version up-to-date by extending your upgrade period for an additional year. Price applicable if purchased after the first three months and before one year of the upgrade expiration. After one year, please contact Intrepid for a quote on the upgrade. |
$958.00 |
 |
Vehicle Spy 3 Basic
Vehicle Spy Basic is a single tool for data acquisition and in-vehicle communication networks bus monitoring. Vehicle Spy was designed to with a focus on ease-of-use and user productivity. |
$995.00 |
 |
Vehicle Spy 3 v501
Vehicle Spy is a single tool for diagnostics, node/ECU simulation, data acquisition, automated testing, and in-vehicle communication networks bus monitoring. Vehicle Spy was designed to with a focus on ease-of-use and user productivity. |
$2,395.00 |
 |
Vehicle Spy Trial
Try it before you buy it!
Vehicle Spy is a single tool for diagnostics, node/ECU simulation, data acquisition, automated testing, and in-vehicle communication networks bus monitoring. Vehicle Spy was designed to with a focus on ease-of-use and user productivity. |
$0.00 |
 |
WaveBPS Base - Software and PicoScope
WaveBPS is an advanced tool for capturing and analyzing serial data analog waveforms like FlexRay, CAN Bus, UART (J1708, K-Line, SCI, GM CGI), J1850, SPI, I2C or LIN Bus. Besides general purpose monitoring, WaveBPS can quickly capture infrequent or intermittent protocol violations.
The PicoScope 5204 is a 128 Mega-sample depth 250MHz bandwidth USB oscilloscope with advanced triggering. |
$3,599.00 |
 |
WaveBPS Professional
WaveBPS is an advanced tool for capturing and analyzing serial data analog waveforms like FlexRay, CAN Bus, UART (J1708, K-Line, SCI, GM CGI), J1850, SPI, I2C or LIN Bus. WaveBPS PRO inlcudes neoVI FIRE Multi-Protocol USB analyzer, Vehicle Spy 3 Software, PicoScope 5204 Oscilloscope, and Navigation Wheel |
$7,795.00 |
 |
WaveBPS Software License
WaveBPS is an advanced tool for capturing and analyzing serial data analog waveforms like FlexRay, CAN Bus, UART (J1708, K-Line, SCI, GM CGI), J1850, SPI, I2C or LIN Bus. Besides general purpose monitoring, WaveBPS can quickly capture infrequent or intermittent protocol violations. |
$795.00 |
