Figure 1 - Add Module Command From the VB.NET Menu.
Using the intrepidcs API in Visual Basic -
intrepidcs API
Setup -
Example
To use the intrepidcs API in Visual Basic add the "bas_neoVI.vb" module into your VB project (figure 1) by right clicking on the Solution and selecting Add Existing Item from the Add menu. Open the bas_neoVI.vb. Then, call the methods as defined in the Basic Operation document.
Figure 1 - Add Module Command From the VB.NET
Menu.
Example
A Visual Basic Dot Net 2003 example (Figure 1) is included
to show how the API all works together. The project consists of Eight Files
files. The main project files are as follows: 1)
the project file: IcsNeoDotNet.sln 2) the form file : Form1.vb,
and 3) the neoVI module : bas_neoVI.vb. All 8 project files are included in the following
file: IcsNeoDotNetVB.zip
The example shows how to open and close communication to the driver, send messages and read messages on the networks.
Figure 2 - The Visual Basic Dot Net 2003
Example.
| intrepidcs API Documentation - (C) Copyright 2000-2012 Intrepid Control Systems, Inc. (www.intrepidcs.com) |
Last Updated : Thursday, December 23, 2010