INTREPID CONTROL SYSTEMS, INC. 1-800-859-6265    FAX: +1 (586) 731-2274 moreinfo@intrepidcs.com
USAChinaKoreaJapan

ValueCAN3

Dual Channel Isolated Dual Wire CAN to USB Interface

Specifications

  • ISO11898 dual wire CAN Physical Layer (TJA1040x2) compatible with Device Net and
    CANOpen
  • J2534 Compliant for CAN and ISO15765
  • RP1210 Compliant for CAN and J1939
  • CCP protocol hardware acceleration
  • Supports listen-only operations
  • Double-buffered CAN transmission
  • Industry standard 9-pin D-sub connector pinout
  • Integrated 1 meter USB cable
  • Transient and reverse battery protected
  • Green and red LEDs indicate transmission or reception of USB data
  • LED indicates transceiver power
  • Operating temperature range: -40° C to +70°C
  • Fully USB-powered with option for external power
  • Input from 6-40V DC; compatible with 24V industrial systems
  • Isolated transceiver side
  • Power Consumption: 15mA @ 14.4 VDC (typical); 100mA @ 14.4 VDC (maximum during bus
    fault)
  • On board Processing: 40 MIPS RISC-based design
  • 64-bit time stamping to an accuracy of 0.5 microseconds for one channel or 5 microseconds for two channels; timestamp never overflows
  • Windows XP / Vista / 7 / 8.X / 10 and Linux drivers
  • Field-upgradeable flash firmware
  • Vehicle Spy Trial included for baud rate setup
  • Graphical Bit Timing Tool
  • One year limited warranty
  • Weight: 3.125 oz (87g)

* Specifications subject to change. Please contact Intrepid for the latest information.

USAChinaKoreaJapan